A perfect industrial floor is more than just a layer of paint; it is a multi-step engineering process. Even the highest quality resin can fail if the application is flawed. At PZSSS, we believe that professional results come from mastering the details. Here are 5 critical factors to ensure your floor coating lasts for years.
1. Surface Moisture Content Applying coating to a damp concrete slab is a recipe for peeling. Always ensure the moisture content is below 4% before starting. PZSSS recommends using a moisture meter to verify the substrate is dry enough for epoxy or polyurethane systems.
2. Proper Mechanical Grinding Smooth concrete lacks the “teeth” needed for paint to grab onto. Mechanical grinding or shot-blasting opens up the pores of the concrete. This ensures the PZSSS Primer can penetrate deep into the surface for maximum adhesion.
3. Dust Removal is Non-Negotiable Even a thin layer of dust can act as a barrier between the concrete and the coating. After grinding, use industrial vacuums to ensure the surface is surgically clean.
4. Accurate Mixing Ratios Industrial coatings are two-component (A+B) systems. Using a professional electric mixer and following the exact ratios provided by PZSSS is vital. Incorrect mixing leads to “sticky spots” or uneven curing.
5. Controlling Environmental Conditions Temperature and humidity play a huge role in the curing process. Avoid application if the humidity is above 85% or if the temperature is near the dew point.
You must be logged in to post a comment.